This thermoplastic elastomer is formulated with SBS and SEBS as base polymers. It delivers soft tactile feel, good elasticity and great low-temperature flexibility.
No vulcanization is needed; it can be injection molded or extruded easily. Common uses include soft-grip overmolding, cable parts, seals and consumer soft-touch components.
SBS/SEBS-Based TPE Compounds Manufacturer & Supplier
SEBS-Based TPE Compounds
SEBS-based grades are commonly considered for applications requiring flexibility and improved resistance to heat and weathering compared with conventional SBS-based formulations. Actual performance depends on the formulation and test conditions.
Application-Specific TPE Compounds
Custom formulations can be evaluated for carpet backing, floor mats, grips, footwear components and other molded or extruded products. Requirements may include specific hardness, color, surface feel, abrasion resistance or substrate compatibility.
-
TPE Pellets for Backed CarpetEco, non-slip, waterproof, tough, stable non-toxicread more
1. High-performance, eco-friendly and fully recyclable
2. Non-slip, waterproof, flexible and durable
3. Excellent dimensional... -
TPE Pellets for Injection-Molded Floor Mat1. Non-slip, waterproof, flexible and durableread more
2. One-piece molding with stable dimensions
3. Wide temperature resistance, no cracking or deformation
4. Non-toxic, odorless,... -
TPE Pellets for Vacuum- Pellets formed Floor Mat1. Flexible, waterproof, non-slip, UV and aging resistantread more
2. 3D fitted, full coverage against dirt and scratches
3. Low-temperature flexible, crack-resistant and durable
4.... -
TPE Pellets for Luggage Edge Trim1.Exceptional flexibility, impact resistance and durabilityread more
2.Lightweight, non-toxic and fully recyclable
3. Stable performance, anti-yellowing, anti-aging and anti-deformation
4.... -
TPE Pellets for Pet Products1.Made from food-grade, non-toxic and bite-resistant TPE materialread more
2.Soft, elastic, waterproof and easy to clean
3.BPA-free, phthalate-free, non-irritating and safe for long-term... -
TPE Pellets for Hand Grips1.Soft and comfortable grip with excellent shock absorptionread more
2.Outstanding wear, oil and sweat resistance for long durability
3.Stable anti-slip performance in wet or oily... -
TPE Pellets for Shoe Materials1.Lightweight cushioning and excellent shock absorptionread more
2.High flexibility, slip resistance and aging resistance
3.Stable performance at high and low temperatures
4.Resists... -
TPE Pellets for Chemical1.Excellent elasticity, processability and full recyclabilityread more
2.Non-toxic, halogen-free and customizable in various properties
3.No complex vulcanization process for efficient... -
TPE Pellets for Rubber Sheet1.High flexibility, tear resistance and non-slip performanceread more
2.Waterproof, oil resistant and easy to process and fabricate
3.Stable performance at high and low temperatures... -
TPE Pellets for Medical Accessories1.Excellent biocompatibility and reliable sealing performanceread more
2.Latex‑free, non‑irritating, non‑toxic and safe for human contact
3.Resists multiple sterilization methods without... -
TPE Pellets for Fitness Products1.High elasticity and cushioning for joint protectionread more
2.Excellent non-slip performance in wet and dry conditions
3.Non-toxic, BPA-free, phthalate-free and safe
4.Sweat, UV and... -
TPE Pellets for Textile Equipment1.Excellent wear resistance, oil resistance and chemical resistanceread more
2.High elasticity, low noise and stable dimensional performance
3.Stable under high-speed, high-temperature and...
Applications
Carpet Backing and Floor Mats
TPE compounds can be selected for flexible backing and molded mat applications where surface grip, flexibility, dimensional stability and processing behavior matter. Confirm the required thickness, substrate and finished-product performance.
Hand Grips and Soft-Touch Components
For handles and consumer product components, selection may focus on hardness, tactile feel, elastic recovery, abrasion resistance and adhesion to the rigid substrate. Overmolding compatibility must be verified for the specific TPE grade and substrate combination.
Footwear Components
Footwear applications may require a balance of flexibility, cushioning, abrasion resistance, grip and repeated-flex performance. The appropriate formulation depends on the component design and expected service conditions.
Seals and Flexible Molded Parts
TPE grades can be evaluated for flexible components requiring elastic recovery and dimensional stability. Where sealing performance is critical, confirm compression set, temperature exposure, media compatibility and the applicable service requirements.
Cable Accessories and Other Extruded Products
For cable-related components and extruded profiles, confirm the required flexibility, surface finish, dimensional consistency and electrical or environmental specifications where applicable.
Material Properties & Specifications
|
Typical Properties |
Test Method |
Unit |
Standard Range |
Typical Values* |
|
Form |
N/A |
– |
– |
Pellet |
|
Color |
N/A |
– |
– |
Natural |
|
Hardness |
ASTM D2240 |
Shore A |
58 ± 5 |
60 |
|
Specific Gravity |
ASTM D792 |
g/cm³ |
1.45 ± 0.05 |
1.47 |
|
Tensile Strength |
ASTM D412 |
MPa |
≥ 1.2 |
1.22 |
|
Tear Strength |
ASTM D624 |
N/mm |
≥ 10 |
11 |
|
Elongation at Break |
ASTM D412 |
% |
≥ 300 |
530 |
Note: The table above is provided for reference regarding our product series.
Custom Compounding & Material Development
Rheology Modification:
Adjusting Melt Flow Index (MFI) to match complex thin-wall injection molds or high-speed profile extruders.
Hardness & Haptic Tuning:
Customizing Shore hardness (from ultra-soft 10 Shore A to semi-rigid 50 Shore D) alongside matte, dry, or silky surface tactile properties.

Functional Additives:
Integrating UV stabilizers, flame retardants (UL94 V-0 options), anti-scratch packages, anti-microbial agents, or color matching against Pantone/RAL standards.
Regulatory Formulations:
Compounding using FDA 21 CFR 177.2600 compliant ingredients, REACH-compliant plasticizers, and low-VOC/low-odor grades for automotive interiors.
Processing & Quality Control
Processing Guidelines
- Drying: Pre-drying at 70°C to 80°C for 2 to 3 hours is recommended to eliminate surface moisture prior to processing.
- Injection Molding Temperatures: Rear barrel 160°C to 180°C; Front barrel 180°C to 200°C; Nozzle 190°C to 210°C. Mold temperature: 20°C to 50°C.
- Extrusion Temperatures: Feed zone 150°C to 170°C; Compression zone 170°C to 190°C; Die head 180°C to 200°C.
Quality Assurance Testing
Every production lot undergoes rigorous laboratory testing prior to shipment:
- Hardness testing via Shore Durometer.
- Tensile strength and elongation verification using electronic universal testing machines.
- Melt Flow Index (MFI) measurement to guarantee stable melt rheology.
- Ash content and specific gravity testing.
OEM Support & Bulk Supply
Sample Policy:
2.5kg to 5kg trial sample pellets dispatched for laboratory testing and prototype molding.
Packaging Options:
25kg moisture-resistant kraft paper bags with inner PE lining; 800kg to 1000kg wood-palletized gaylord boxes / bulk sacks for automated warehouse loading.
Lead Time:
Standard grades ship within 5 to 7 business days; custom color compounding and formulation development require 10 to 14 business days.
Shipping Terms:
FOB Shanghai/Ningbo or CIF destination port via ocean freight or air express.
FAQ

Request a Quote
Looking for an SBS- or SEBS-based TPE compound for a new product or an established production line? Share your application and material requirements to begin the grade-selection process.
Please include:
Application and finished-part description
Target hardness and key performance requirements
Injection molding or extrusion process
Substrate and overmolding requirements, if applicable
Operating conditions and compliance requirements
Estimated order quantity, packaging and delivery destination
Contact Kesun Polymer to discuss grade selection, sample evaluation and bulk supply.
Email: talia@kesuntpe.com
WhatsApp: +86 182 6102 3199
Kunshan Kesun Polymer Co., Ltd. is one of the most professional TPE manufacturers and suppliers in China, featured by quality products and low price. Please feel free to wholesale bulk eco-friendly TPE from our factory. Contact us for customized service and free sample.
